Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX 515E Info

Hi ,

Can anyone tell me how many LAN to LAN tunnels can be established in PIX 515E.

Regards.

5 REPLIES
Cisco Employee

Re: PIX 515E Info

The data sheet:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_data_sheet09186a0080091b15.html

says that it'll do 2000 tunnels max, that'd include both client and L2L tunnels.

New Member

Re: PIX 515E Info

Hi,

Yes i have check the data sheet, but i think it is only 2000 tunnel for VPN Client, not sure it is for LAN-to-LAN tunnels.

Regards

Silver

Re: PIX 515E Info

Hi,

It is 2000 tunnels. 2000 is the total number of tunnels, neither these tunnels are site-to-site, client-to-site or both.

I do not know why you posted your question, but I like to remind you on one other thing. The PIX will not allow traffic coming in on one tunnel qand leaving on on another tunnel connected on the same interface (in other words: hub and spoke configuration is not supported on PIX).

If you do need to use hub and spoke a better choice would be a VPN3000 Concentrator.

Kind regards,

Leo

New Member

Re: PIX 515E Info

Hi Leo,

Thanks. I got your point, but my question was "how many LAN-to-LAN tunnels can i configure on my PIX 515E".

If you see the data Sheet it says 2000 "Simutanious" IPSEC connections.

Silver

Re: PIX 515E Info

In the world of cisco, a tunnel is a tunnel is a tunnel - for neither licensing nor hardware capability reasons Cisco does not discriminate in favor of either end user or site to site tunnels - they are interchangeable

90
Views
0
Helpful
5
Replies
CreatePlease to create content