02-07-2006 10:01 AM - edited 02-21-2020 12:41 AM
How can I tell which license I have on a PIX515E? I need to know if it is restricted or unresticted. Here's the output of sh ver but nothing jumps out at me and says which one.
Cisco PIX Firewall Version 6.2(2)
Cisco PIX Device Manager Version 1.1(2)
Compiled on Fri 07-Jun-02 17:49 by morlee
EAC-FW01 up 3 hours 24 mins
Hardware: PIX-515E, 32 MB RAM, CPU Pentium II 433 MHz
Flash E28F128J3 @ 0x300, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
0: ethernet0: address is 000a.b7bc.4b30, irq 10
1: ethernet1: address is 000a.b7bc.4b31, irq 11
2: ethernet2: address is 0002.b3ad.8176, irq 11
Licensed Features:
Failover: Enabled
VPN-DES: Enabled
VPN-3DES: Disabled
Maximum Interfaces: 6
Cut-through Proxy: Enabled
Guards: Enabled
URL-filtering: Enabled
Inside Hosts: Unlimited
Throughput: Unlimited
IKE peers: Unlimited
Serial Number: 806343913 (0x300fd4e9)
Running Activation Key: xxxx
Configuration last modified by enable_15 at 10:26:27.064 UTC Tue Feb 7 2006
Solved! Go to Solution.
02-07-2006 10:54 AM
This is an unrestricted license. The number of maximum interfaces is one way to tell. Restricted is only 3 where UR is 6. You can use this page to see other differences.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_data_sheet09186a00800b0d85.html
You could also paste your show version into Output interpreter tool if you are a registerd user.
Steve
02-07-2006 10:54 AM
This is an unrestricted license. The number of maximum interfaces is one way to tell. Restricted is only 3 where UR is 6. You can use this page to see other differences.
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_data_sheet09186a00800b0d85.html
You could also paste your show version into Output interpreter tool if you are a registerd user.
Steve
02-07-2006 03:28 PM
Another way to tell is Failover is enabled. Failover is not supported in the Restricted license.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide