Dear all,
We have just bought a PIX 515E and try to use it but got a few issues. Here is the show ver:
PIX-151E#show version
Cisco PIX Firewall Version 6.3(1)
Cisco PIX Device Manager Version 3.0(1)
Compiled on Wed 19-Mar-03 11:49 by morlee
PIX-515E up 5 hours 15 mins
Hardware: PIX-515E, 64 MB RAM, CPU Pentium II 433 MHz
Flash E28F128J3 @ 0x300, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
0: ethernet0: address is 000f.2457.4b12, irq 10
1: ethernet1: address is 000f.2457.4b13, irq 11
Licensed Features:
Failover: Enabled
VPN-DES: Enabled
VPN-3DES-AES: Enabled
Maximum Interfaces: 6
Cut-through Proxy: Enabled
Guards: Enabled
URL-filtering: Enabled
Inside Hosts: Unlimited
Throughput: Unlimited IKE peers: Unlimited
This PIX has a Failover Only (FO) license.
Problem is we cannot ping the Inside port if we do not turn on failover but this is single machine. Here is another message after we turn on Failover:
PIX-515E# config t
**** WARNING ***
Configuration Replication is NOT performed from Standby unit to Active unit.
Configurations are no longer synchronized.
PIX-515E(config)#
Please help to resolve this issue. Wonder if we purchase the wrong license ? Thanks a lot.
