Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PIX 515E unable to boot

I have a PIX 515E with boot problem. These are the lines I received from the console:

CISCO SYSTEMS PIX FIREWALL

Embedded BIOS Version 4.3.207 01/02/02 16:12:22.73

Compiled by morlee

32 MB RAM

PCI Device Table.

Bus Dev Func VendID DevID Class Irq

00 00 00 8086 7192 Host Bridge

00 07 00 8086 7110 ISA Bridge

00 07 01 8086 7111 IDE Controller

00 07 02 8086 7112 Serial Bus 9

00 07 03 8086 7113 PCI Bridge

00 0D 00 8086 1209 Ethernet 11

00 0E 00 8086 1209 Ethernet 10

00 11 00 8086 1229 Ethernet 11

Cisco Secure PIX Firewall BIOS (4.2) #0: Mon Dec 31 08:34:35 PST 2001

Platform PIX-515E

System Flash=E28F128J3 @ 0xfff00000

Use BREAK or ESC to interrupt flash boot.

Use SPACE to begin flash boot immediately.

Reading 1937920 bytes of image from flash.

#########################################################################################################

32MB RAM

mcwa i82559 Ethernet at irq 11 MAC: 000d.65fb.bd40

mcwa i82559 Ethernet at irq 10 MAC: 000d.65fb.bd3f

After that the pix do not answers or display more lines.

I want to know if this error is due hardware or IOS problem.

Thanks in advanced

1 REPLY
Silver

Re: PIX 515E unable to boot

can you press ESC key and go into ROM Monitor mode?

you can try to recover from there.

if you are able to go into rom monitor mode, try to recover using this link

http://www.cisco.com/warp/customer/110/upgrade.shtml#monitor

if you cant then this is a hardware issue

261
Views
0
Helpful
1
Replies
CreatePlease to create content