Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PIX 515E with 1FE card hangs

I have a PIX 515E that keeps hanging.

I found that 2 ethernet interfaces are having the same IRQ.

Will that cause the unit to hang?

Here's the output of show hardware:

Cisco PIX Firewall Version 6.1(3)

Cisco PIX Device Manager Version 1.1(2)

Compiled on Fri 22-Feb-02 08:15 by morlee

Hkgpix up 58 mins 46 secs

Hardware: PIX-515E, 32 MB RAM, CPU Pentium II 431 MHz

Flash E28F128J3 @ 0x300, 16MB

BIOS Flash AM29F400B @ 0xfffd8000, 32KB

0: ethernet0: address is 0009.e89d.0396, irq 10

1: ethernet1: address is 0009.e89d.0397, irq 11

2: ethernet2: address is 0002.b3b2.478c, irq 11

2 REPLIES
New Member

Re: PIX 515E with 1FE card hangs

pix ethernet cards are polled, not interrupt driven, so this is not the problem. have you checked the field notices, there are a couple on 515 failures -

http://www.cisco.com/warp/public/tech_tips/index/hardware/security/500/fn.html

New Member

Re: PIX 515E with 1FE card hangs

Thanks,

I've search through the pages and found no match for field replacement.

However, after I changed the FE card, the firewall runs fine.

I think it is a case of faulty card.

137
Views
4
Helpful
2
Replies