Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Pix 520 ignoring unknown PCI card

I've just upgraded a 520 chassis with PIX-FLASH-16mb kit, and then upgraded

s'ware to 6.1(4). Then on bootup appears :-

Ignoring PCI card in slot:3 (vendor:0x1329 deviceid:0x1 revisionid:0x0)

Double checked, back s'ware to 5.3(2), message disappears, upgrade

to 6.1(4), message appears again.

remove the pci card, and the message disappears, the box

(seems) to boot normally

The card is marked Productivity Enhancement Products

assy 10573-001 pcb 10573-501

The secondary 520 chassis I have here also has a similar card.

Any ideas what does this card do and why does 6.1(4) not support it ??

Cheers

Martyn

1 REPLY
Cisco Employee

Re: Pix 520 ignoring unknown PCI card

This is probably the old 2Meg flash card, did you remove it before installing the 16Meg flash card? A lot of people don't, although generally the PIX doesn't even boot up with both cards installed.

Can you send a "sho ver" when running 5.3(2)?

171
Views
0
Helpful
1
Replies
CreatePlease to create content