Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

PIX 520 upgrade

I am looking for any advice or hints on the process of upgrading a PIX520 (with a PIX520 failover) from version 6.0.1 to 6.2.2

I have a document from CCO that lays out the step by step process, but I just wanted to post a question here to try and get some advice from someone that has done it before.

Thanks!

1 REPLY
Silver

Re: PIX 520 upgrade

The steps are pretty simple. Here's a jist of it.

Once you download the 6.2.2 file from the Software Center,

--Copy the PIX Firewall binary image (pixnnn.bin) to the root directory of the TFTP server.

--From the PIX prompt, issue the copy tftp flash command.

--Enter the remote host IP address.

--Enter the PIX binary filename (has the pixnnn.bin name format).

--Type yes

Please refer to the following link for more detailed information:

http://www.cisco.com/warp/public/110/upgrade.shtml#usingcommdupgrade

79
Views
0
Helpful
1
Replies
CreatePlease to create content