I have a Cisco PIX525 and i'd like to know how I can monitor the output information of the "sh service-policy" command trough SNMP (instead of CLI) including the number of sessions established through an interface. Is this possible? If yes, how?
It is possible to monitor pix 525 using SNMP.The snmp-server command causes the PIX Firewall to send SNMP traps so that the PIX Firewall can be monitored remotely. Use snmp-server host command to specify which systems receive the SNMP traps.
Refer the following url for more information on mionitoring pix 525 using SNMP:
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...