Cisco Support Community
Community Member

Pix 525

I have a building that we would like to put behind a firewall.

Basically here is out it is laid out. A 6509 is the main switch of the

building with multi vlans. We are going to take a port out of the 6509

run into 3750-12 then into a pix 525 then back into a 3750-12 then

back into the 6509. We are just wanting to protect this building from

any outside attacks.

1) I would like to know how i can use static ip's within that buildings

ip range intstead of private on the inside interface or could i just

let all ip's for that buildings ip range pass through. I would like to continue usiing the vlans

that we have already in place for that buidling also. DO NOT want to use

private addressing if possible. Also like to elminiate nating on the

firewall and allow dhcp server to continue to give out addressing and

pass that through the firewall. Or could we just allow all vlans to

pass through. Any help would be appreciated.


Re: Pix 525

For more details on the configuration of the appliance kindly follow the url,

CreatePlease to create content