Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PIx 6.2(2) common criteria evaluation

Now that Pix 6.2(2) is evaluated under common criteria:

http://www.cesg.gov.uk/assurance/iacs/itsec/cpl/product.cfm?id=118

Can someone please clarify if the use of the conduit statement was part of the security target, and also if the use of norandomseq is permitted under the target of evaluation in conjunction with ACL's?

Is there any hope of an ACE to cover failover?

1 REPLY
New Member

Re: PIx 6.2(2) common criteria evaluation

Please refer to http://www.cisco.com/en/US/customer/products/sw/secursw/ps2120/products_installation_and_configuration_guide09186a00800f253e.html#44891. The document describes how to install and configure a PIX (PIX software version 5.2(3)) as certified by Common Criteria Evaluation Assurance Level 4 (EAL4). If you find a conduit and norandomseq there, well that would answer your question as yes.

Product Bulletin - No. 899 at http://www.cisco.com/en/US/customer/products/hw/vpndevc/ps2030/prod_bulletin09186a0080099741.html will give you additional information about the TTAP certification.

101
Views
1
Helpful
1
Replies