Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PIX 6.2 to 7.1 conversion

Hi all, well I'm new to the PIX world so if anyone can help, here goes.

Is there a tool that converts PIX 6.x ios configs to 7.1. I'm going from a PIX 506 to a 525.

1 ACCEPTED SOLUTION

Accepted Solutions
Gold

Re: PIX 6.2 to 7.1 conversion

if you're using conduits, you can convert them to ACL's using the OCC tool available here:

http://www.cisco.com/cgi-bin/tablebuild.pl/pix

other than that, there's no tool for what you need. most of the commmands will be the same though. It will be easier if you first upgrade the 506 to 6.3(5) though.

1 REPLY
Gold

Re: PIX 6.2 to 7.1 conversion

if you're using conduits, you can convert them to ACL's using the OCC tool available here:

http://www.cisco.com/cgi-bin/tablebuild.pl/pix

other than that, there's no tool for what you need. most of the commmands will be the same though. It will be easier if you first upgrade the 506 to 6.3(5) though.

87
Views
0
Helpful
1
Replies
CreatePlease to create content