01-29-2008 02:59 AM - edited 02-21-2020 01:52 AM
Hi,
I have a pix 515E in failover mode running ver 6.3(4). We want to upgrade to 7.x but do not know which version of 7 to start with. Can anyone tell me the best path to follow. Can I upgrade from 6.3(4) to 7.2 without first upgrading to 7.0.
Rgds
pet
Solved! Go to Solution.
02-03-2008 10:00 PM
Hi,
Yes, you can but it is not recommendable. Please upgrade first to 7.0.7 which is the latest one within 7.0 train. Then you can go for 7.2.x
Please bear in mind that there are some commands that have been deprecated from 6.x to 7.x specially on VPN:
http://www.cisco.com/en/US/docs/security/asa/asa70/pix_upgrade/upgrade/guide/pixupgrd.html#wp1753758
01-29-2008 03:59 AM
The minimum software version required before performing an upgrade to PIX Version 7.2 is PIX Version 7.0
Check this link for more info
http://www.cisco.com/en/US/docs/security/pix/pix72/release/notes/pixrn722.html#wp43582
M.
Hope that helps rate if it does
02-01-2008 07:54 AM
Thaks M. I will try that in a couple of weeks and let you know.
Rgds
pet
02-03-2008 10:00 PM
Hi,
Yes, you can but it is not recommendable. Please upgrade first to 7.0.7 which is the latest one within 7.0 train. Then you can go for 7.2.x
Please bear in mind that there are some commands that have been deprecated from 6.x to 7.x specially on VPN:
http://www.cisco.com/en/US/docs/security/asa/asa70/pix_upgrade/upgrade/guide/pixupgrd.html#wp1753758
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: