I had 515 pix fiewall (6.3 IOS) with 3 zones LAN,WAN and DMZ. all my public servers are in DMZ which are static nat with public ip address. now all these servers are accessible from outside with public ip address. when i try to access these servers from lan using their nated public ip add they are not accessible, i want to access the servers from lan with both their PVT and public ip address
Here is the deal. When you do: static (DMZ, outside) outside_IP, DMZ_IP netmask 255.255.255.255 then access to that outside ip is tied to the interface referred to in the static configuration statement.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...