Has anybody managed to get a VPN working between PIX 6.x and Raptor Ver 6.5? My experience is that ISAKMP fails after successfully negotating phase 1. I've attempted configuration using manual keys but without success.
Looked at the config from the link above. It was for a router not a pix, but should be a good basis to convert onto a pix. Have you set "isakmp identity address". The pix sets identity to hostname by default.
I have found that some other vendors require the pix to be set this way to talk ipsec.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...