Thanks for reading my post [a few times] and sorry for not being clear
The firewall has three eth ports. Currently only two are being used - one for outside (dynamically assigned IP from the ISP), one for inside (10.0.0.0/24) and now I want to configure the third port as a DMZ segment (172.16.0.0/24) and stick a FTP server on it. I'm using Dynamic DNS so I don't really need a static IP for the external interface. I want the inside network to be able to access samba services on the ftp server and I'm going to use PAT to forward the FTP port to the 172.16 address.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...