PIX 7.0(4) Hairpinning or routing through the same interface
I have read that PIX version 7 and up allows "hairpinning" encrypted traffic. That's beautiful, but did someone find out how to route regular IP traffic through the same interface (same security level) on a PIX running version 7up? Alernatively, can we do it through a loopback interface like with IOS ?
Re: PIX 7.0(4) Hairpinning or routing through the same interface
I have set this up for hub and spoke vpn clients and it works like a charm. I used the same-security-traffic perpit intra-interface. The key here is intra-interface which specifies ipsec traffic, if you use inter-interface it allows communication between interfaces with the same security level but you would need a seperate physical interface.....have a look at the command guide here
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...