11-16-2005 01:59 AM - edited 02-21-2020 02:06 PM
Hi,
I can't admin the PIX using a Remote access VPN, I tried ASDM and telnet, but I can't make it work.
Please, some one can post a example config?. On CCO I only find how to admin using a L2L VPN.
Thank you very much
J.
11-16-2005 03:00 AM
apply the following commands on pix v7:
management-access inside
telnet
http
09-13-2010 04:53 PM
There does seem to be a bug after a reload of an ASA running 8.2(1). Prior to reload (yes I saved my configuration) I was able to telnet to the inside interface of the ASA through the remote access VPN client. After reload, I could ping the inside interface and could telnet to it, but would get a blank screen and then I would get disconnected as soon as I pressed a key. I removed the "management-access inside" command and re-added it which fixed my problem. I wonder if I will have to do this next time I reload. I need to upgrade to 8.2(3) anyway.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide