Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PIX 7.0: administering using remote Access VPN.

Hi,

I can't admin the PIX using a Remote access VPN, I tried ASDM and telnet, but I can't make it work.

Please, some one can post a example config?. On CCO I only find how to admin using a L2L VPN.

Thank you very much

J.

2 REPLIES
Gold

Re: PIX 7.0: administering using remote Access VPN.

apply the following commands on pix v7:

management-access inside

telnet inside

http inside

New Member

Re: PIX 7.0: administering using remote Access VPN.

There does seem to be a bug after a reload of an ASA running 8.2(1).  Prior to reload (yes I saved my configuration) I was able to telnet to the inside interface of the ASA through the remote access VPN client.  After reload, I could ping the inside interface and could telnet to it, but would get a blank screen and then I would get disconnected as soon as I pressed a key.  I removed the "management-access inside" command and re-added it which fixed my problem.  I wonder if I will have to do this next time I reload.  I need to upgrade to 8.2(3) anyway.

352
Views
5
Helpful
2
Replies
CreatePlease to create content