PIX 7.0 configuring dhcprelay on trunk interface

rman · ‎11-19-2005

Hi,

We are using PIX 7.0.4 and Our dhcp server was located on outside. I could configure the dhcp server address. However, I found that dhcprelay can be only enabled on physical interface but not vlan (tagged) interface.

Is it PIX-OS bug ?

Do this problem also appear on PIX6.3 ?

dhcprelay server IP_address outside

dhcprelay enable <vlan-interface>

rman · ‎11-21-2005

Hi,

I fixed this problem after erase the whole configuration and configure it step by step. I think the previous problem is due to some hidden configurations.