Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PIX 7 NAT no translation group found

a device that has been segmented on a vlan interface on the pix has been assigned a dynamic translation, but can't seem to get correct translation:

here's a snap of the config:

nat-control

nat (inside) 0 0.0.0.0 0.0.0.0

static (Aspect-vlan,Outside) 146.74.48.1 172.20.9.34 netmask 255.255.255.255

static (Aspect-vlan,inside) 172.20.5.50 172.20.5.50 netmask 255.255.255.255

here's the show xlate:

sh xlate

6 in use, 11 most used

Global 172.20.5.50 Local 172.20.5.50

can you help??

thanks in advance!

1 REPLY
New Member

Re: PIX 7 NAT no translation group found

disregard this post the problem has been found. I meant to assign a static one for one not a dynamic. In the gui asdm 5.02 I had selected dynamic since this was by default.

my bad!

thanks,

Ch.

114
Views
0
Helpful
1
Replies