Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

pix and pdc problem

hi

i have a problem. i had got some servers on the pix dmz interface. now my pdc is on the inside interface. i want that our servers which r in dmz interface should be able to authenticated with the pdc which is in the dmz . please tell me the solution.

2 REPLIES
Gold

Re: pix and pdc problem

static and inbound acl are required.

e.g.

static (inside,dmz) 1.1.1.1 192.168.1.1 netmask 255.255.255.255

access-list inbound_dmz permit tcp host 1.1.1.1 eq xxx

access-group inbound_dmz in inter dmz

you need to do a research on the actual protocol/port required for ad authentication.

New Member

Re: pix and pdc problem

thanks , but my friend i know this already. i was actually looking for the ad port...any way thanx for ur quick reply. and if any

102
Views
0
Helpful
2
Replies