Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

PIX and pool defined on ACS server

Hello,

I would greatly appreciate if somebody could confirm two things:

1. Whether PIX supports assigning IP addreesses to VPN clients from IP POOLs defined on Cisco Secure ACS 3.1 server?

2. If I define several IP LOCAL POOLs on the PIX and assign them to different ACS groups, does it (PIX) support "IP Assignment - Assigned from AAA Client pool" option on Cisco Secure ACS 3.1 server for VPN Clients?

Thank you in advance

1 REPLY
Bronze

Re: PIX and pool defined on ACS server

Unfortunately, this is currently not possible with the PIX software, the mode-config address must be defined locally, as shown in the below given URL.

http://www.cisco.com/warp/public/110/B.html

169
Views
0
Helpful
1
Replies
CreatePlease to create content