Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX behind Cisco 1841 - Need SSH access

Hello, trying to allow SSH access to PIX for a few external clinets/hosts.

What are the correct Acl's I need?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: PIX behind Cisco 1841 - Need SSH access

Exactly correct ..

1.- On the router you need to allow incoming TCP 22 (ssh) to your PIX on the outside interface of the router and also allow the return traffic from the PIX on the inside interface of the router.

2.- On the PIX you need to generate the rsa keys and save them.

ca generate rsa key 1024

ca save all

3.- On the pix you need to allow ssh acccess to te outside interface

ssh outside

Rate it if you find it helpful

5 REPLIES
New Member

Re: PIX behind Cisco 1841 - Need SSH access

hi there for ssh. all u need to do is generate the rsa keys. and ssh specify the ip address fo the hosts or their subnet and they will get access. u don't need to have any access-list cause u are connecting to the pix and not through the pix. hope this helps. pls rate if it does.

sebastan

New Member

Re: PIX behind Cisco 1841 - Need SSH access

How about Acl's on the 1841 router to access the PIX?

The Pix is behind the router and I want to gain access to it from the internet.

Yeah, the PIX won't need anything but how is going to connect via SSH Like:

SSH 12.152.XXX.XXX 255.255.255.255 OUTSIDE

Re: PIX behind Cisco 1841 - Need SSH access

Exactly correct ..

1.- On the router you need to allow incoming TCP 22 (ssh) to your PIX on the outside interface of the router and also allow the return traffic from the PIX on the inside interface of the router.

2.- On the PIX you need to generate the rsa keys and save them.

ca generate rsa key 1024

ca save all

3.- On the pix you need to allow ssh acccess to te outside interface

ssh outside

Rate it if you find it helpful

New Member

Re: PIX behind Cisco 1841 - Need SSH access

Could you please provide me some examples ofthe Acl's that I'll need on the 1841? Then I will rate it.

Thanks Fernando.

New Member

Re: PIX behind Cisco 1841 - Need SSH access

dude i guess people have helped u a lot out here . if u are not even clear to work with acls. then sorry we can't help u . and pls don't ask for favours just to get to rate them

sebastan

107
Views
0
Helpful
5
Replies
CreatePlease login to create content