My client is looking for a software , similar to the ones with Swithch , know the Switch manager , the GUI provided by cisco where you can manage and easily configure the switch .. may that be a 2900 or a 3500 series switch .
The same way , is there any sofware available any where on the net , where in the PIX can be configured using a kind of web browser , or is there any software that after installation and configuration of the pix , it can be monitored by some software of the ports that are open , the traffic comming , and analyse the logs created.
You can use the PIX PDM software. It's a GUI that requires PIX 6.0. Go to http://www.cisco.com/cgi-bin/tablebuild.pl/pix to get the software. Note, the PDM is great for basic configuring and monitoring but lacking in features such as VPN setup and management. For that I think you need Cisco Security Manager. Hope this helps.
I am already working with PDM 1.0.2 on a pair PIX 525 sw 6.0.1. Environment is a failover one (no stateful), I have noticed that the only only box answering to browser is the primary unit through inside IP address (when active) or failover inside IP address when in standby.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...