08-08-2001 12:50 PM - edited 02-20-2020 09:49 PM
running a PIX 506 with 6.0 installed.
When client dials in with client they can no longer browse internet or use any local network services. I Know it is probably an easy fix but it has me stumped.
Robbie
08-08-2001 02:50 PM
what IP are you assigning the clinet when they connect ? is it anything close to the inside address
of the pix ? If not, maybe an access list will do the trick.
with respect to local network services, on this board and the vpn board there are some discussions on what udp ports to let through the VPN side to allow network browsing.
remmeber if its a windows network, a lot of that stuff is NetBIOS....
08-09-2001 05:58 AM
Sounds like their default gateway is changing when they connect.
08-10-2001 06:10 AM
Talked to tech support and it was a quick fix I had to issue a split-tunnel command
Thanks anyway!
Robbie
08-10-2001 01:31 PM
Be very cautious with enabling split-tunneling. You are opening a backdoor into your internal network. This could make your security implementation worthless.
Generally it is a bad idea to have split-tunneling enabled.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: