PIX command issue

[shawvoel]

Hi All,

Can anyone help on this command,

access-list TCP_PORT_RANGE permit tcp host 202.187.24.90 host 192.168.199.90 range 5500 5800

nat (inside) 10 access-list TCP_PORT_RANGE outside

global (outside) 10 202.187.24.90

Can anyone explain how this can work?

Not very clear what can be done with this command.

Thank you.

Rgds,

Au Yeong Shaw Voel

[m.sir]

I think its misconfiguration a its not working

because ACL is in direction outside--->inside

and

NAT which is using this ACL in direction inside---->outside

So no traffic from access list TCP_PORT_RANGE cannot goes to inside interface and NAT rule cannot be aplied

M.