01-20-2004 10:08 AM - edited 02-21-2020 01:00 PM
We have a pix 515 that is currently configured for PPTP connections via the windows dun vpn client. Recently I tried adding configuration statements to allow cisco secure client connections. This configuration made it so that the PPTP connections could no longer access the inside network, even though they could still authenticate and make a connection.
So my first question, is it possible to have the pix configured for both a pptp client, and a cisco secure client connection?
And, the obvious follow up question, is there a good document online that spells this out?
Thanks in advance.
~rls
01-20-2004 10:51 AM
Hi,
Should not be a problem. Take a look at this sample config and see if this helps. It actually has a bit more in that what you are trying to do. If there are any questions you have after reading through this, let us know.
Good luck.
Scott
01-20-2004 01:21 PM
Thanks much Scott.
I'll give this a try during off hours and see how it goes.
~rls
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide