Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX configured for PPTP clients AND Cisco Secure vpn client?

We have a pix 515 that is currently configured for PPTP connections via the windows dun vpn client. Recently I tried adding configuration statements to allow cisco secure client connections. This configuration made it so that the PPTP connections could no longer access the inside network, even though they could still authenticate and make a connection.

So my first question, is it possible to have the pix configured for both a pptp client, and a cisco secure client connection?

And, the obvious follow up question, is there a good document online that spells this out?

Thanks in advance.

~rls

2 REPLIES

Re: PIX configured for PPTP clients AND Cisco Secure vpn client?

Hi,

Should not be a problem. Take a look at this sample config and see if this helps. It actually has a bit more in that what you are trying to do. If there are any questions you have after reading through this, let us know.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080093f89.shtml

Good luck.

Scott

New Member

Re: PIX configured for PPTP clients AND Cisco Secure vpn client?

Thanks much Scott.

I'll give this a try during off hours and see how it goes.

~rls

85
Views
0
Helpful
2
Replies
CreatePlease login to create content