PIX desnt forward interesting traffic! Help urgent needed
access-list 101 permit tcp any any eq domain
access-list 101 permit tcp any any eq 8080
access-list 101 permit ip host 192.168.0.250 any
dialer-list 1 protocol ip list 101
The above ACL works fine if the router(801) is directly connected to the switch. But if i connect a firewall|(PIX-501) then router doesnt comeup once disconnected. It means the router couldnt recieve the interesting traffic.
Help on this is urgent needed since i have temporary used dialer-list 1 protocol ip permit in router which keeps my ISDN line always ON, despite of idle-timeout 60 in router.
The pix is always sending some traffic, no idea what is it.
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...