Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

PIX DHCP Server and subnet mask

Is it possible to have the DHCP server on the PIX 501 hand out a subnet different from the one on the inside interface? I am trying to have a class B subnet mask on the interface, with two different class C subnets behind the inside interface so the two subnets cannot talk to each other. One subnet will be static and be permitted through the company VPN, the other subnet would be DHCP and be for laptops or whatnot that are plugged in. Is it possible to do this?

1 REPLY
Silver

Re: PIX DHCP Server and subnet mask

Hi,

The address pool of a PIX Firewall DHCP server must be within the same subnet of the PIX Firewall interface that is enabled. In other words, the client must be physically connected to the subnet of a PIX Firewall interface.

See the linkhttp://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/cmdref/df.htm#1025497

96
Views
0
Helpful
1
Replies
CreatePlease to create content