Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PIX EZVPN Phase 1 Problem

I am having trouble getting past phase 1 with my PIX501 running 6.3(3). Below is the log from the VPN3060 concentrator (4.04a) showing an error. Unfortunately, I cannot find anything on CCO for what this error and associated flags mean.

59586 02/13/2004 10:19:40.500 SEV=7 IKEDBG/65 RPT=165 200.78.65.18

Group [Default]

IKE AM Responder FSM error history (struct &0xfbfb3c8)

<state>, <event>:

AM_DONE, EV_ERROR_CONT

AM_DONE, EV_ERROR

AM_WAIT_MSG3, EV_TIMEOUT

AM_WAIT_MSG3, NullEvent

59591 02/13/2004 10:19:40.500 SEV=9 IKEDBG/0 RPT=4113 200.78.65.18

Group [Default]

IKE SA AM:fa8b7efd terminating:

flags 0x0100c001, refcnt 0, tuncnt 0

2 REPLIES
New Member

Re: PIX EZVPN Phase 1 Problem

I am currently having the same problem. Did you find a resolution, to the Phase 1 negotiation issue with EZVPN.

New Member

Re: PIX EZVPN Phase 1 Problem

If I remember correctly, I had to re-enter the group/pwd and username/pwd pairs and it worked. For some reason after a reboot, the passwords became corrupted.

146
Views
0
Helpful
2
Replies