pix firewall configuration

[jjcarranza]

hi.

actually in my pix i have the configuration shown in the sample configuration: Configuring the Cisco VPN 3000 Concentrator to the PIX Firewall,

so i need to configure a VPN client (throug DSL line) in my pix, with the following asociation

VPN 3000 concentrator<- PIX -> VPN client,

in my pix firewall, may i configure a different crypto map for the VPN client connection?,

if you have a sample configuration please let me know:

thanks,

[afakhan]

Hi,

As it seems that your VPN3K is hanging off of your PIX (inside or dmz), please make sure that you have ESP/TCP(for ipsec/tcp)UDP(for ipsec/udp and/or UDP500 (isakmp) protocol/ports opened up on the PIX FW static that you will configure for VPN3K Public interface IP.

Other than that you'd need to configure your VPN3K to accept VPN3K client connections.

http://www.cisco.com/warp/public/471/nt.html

Hope it helps.

Thanks,

Afaq