Do you use the PIX for point-to-point VPN between sites?
Do you use the PIX as a VPN concentrator for end users?
Do you have a DMZ or multiple DMZs?
Has anything recently changed in your network that would have increased traffic through your PIX?
I mention these things because they all require CPU resources and memory.
The easiest way to free up memory is to reboot the PIX. Of course, this is not always an option but the results are very predictable. If after the reboot the memory usage goes right back up to previous levels then it's time to do a traffic study of your network and determine if this PIX has the horsepower you require or if some other network re-design is in order.
Show Name: Thoughts on Security at Cisco Live US 2018 in Orlando
Contributors: Kevin Klous, David White Jr., Aaron Woland, Jeff Fanelli
Posting Date: June 2018
Description: The team goes on-site in the Cisco Live Speaker room in...
RADIUS and Symantec VIP.
I will use screenshots of ASDM, and at the end I will add the required CLI commands. the diagram below show a diagram of the steps the FW goes through when using 2FA authentication:
As you can see in Fig. 1&nbs...