01-24-2006 06:12 AM - edited 02-21-2020 12:39 AM
Hi,
What could be the causes that would give the following errors on a PIX 535 Gig Interface:
MTU 1500 bytes, BW 1 Gbit full duplex, Force link-up
3014970004 packets input, 69627346753824 bytes, 22550774 no buffer
Received 2 broadcasts, 0 runts, 0 giants
0 input errors, 6 CRC, 6703846 frame, 58 overrun, 6 ignored, 0 abort
982565866 packets output, 62111142344326 bytes, 0 underruns
input queue (curr/max blocks): hardware (0/25) software (0/0)
output queue (curr/max blocks): hardware (0/256) software (0/0)
01-24-2006 11:22 PM
Hi
can you revert the type of equipment where this pix is getting interfaced with on this particular Gigabit interface ?
also did u check up for possible errors on the other end too ??
regds
01-25-2006 01:22 AM
Unfortunately we dont have access to that device its a Cisco GSR. We are still waiting for provider to let us know if there are any issues.
Miron
01-25-2006 01:36 AM
Hi
In first place i would suggest to get the duplex and the speed setting checked up in the GSR side which could also be a potential reason for the same.
Itz always good to have them hardcoded on both the sides instead of leaving them to get negotiated.
regds
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide