12-07-2003 07:38 AM - edited 02-20-2020 11:08 PM
Hi,
Am upgrading the 6.1 to 6.23 on PIX 525 , and am getting error
monitor> interface 1
0: i8255X @ PCI(bus:0 dev:14 irq:10)
1: i8255X @ PCI(bus:0 dev:13 irq:11)
2: i8255X @ PCI(bus:1 dev:0 irq:11)
3: i8255X @ PCI(bus:1 dev:1 irq:10)
4: i8255X @ PCI(bus:1 dev:2 irq:9 )
5: i8255X @ PCI(bus:1 dev:3 irq:5 )
Using 1: i82557 @ PCI(bus:0 dev:13 irq:11), MAC: 000b.5f57.4331
monitor> address 192.168.17.1
address 192.168.17.1
monitor> server 192.168.17.5
server 192.168.17.5
monitor> file pix623.bin
file pix623.bin
monitor> ping 192.168.17.5
Sending 5, 100-byte 0xe3e9 ICMP Echoes to 192.168.17.5, timeout is 4 seconds:
!!!!!
Success rate is 100 percent (5/5)
monitor> tftp
tftp pix623.bin@192.168.17.5...........................
.......................................
Received 128336 bytes
Cisco Secure PIX Firewall admin loader (3.0) #0: Thu Jul 17 08:02:52 PDT 2003
System Flash=E28F128J3 @ 0xfff00000
BIOS Flash=am29f400b @ 0xd8000
imgsum_config: sumval(0x8b74) md5(0xc57589e0 0xec398acd 0x6558d7bb 0x10dd9677)
imgsum_verify: chksum(0x0 ) md5(0xdcd45e93 0x125e91b5 0x374d26ac 0x0f6336ce)
Checksum verification on install image failed ********
also from tftp ---
Int-fw-1# copy tftp flash
Address or name of remote host [127.0.0.1]? 192.168.17.5
Source file name [cdisk]? pix623.bin
copying tftp://192.168.17.5/pix623.bin to flash:image
[yes|no|again]?y
!!!!!!!!!!!!!!!!!!!!!!!!!!
Received 128336 bytes.
Checksum verification on new image failed.
Image not installed.
Int-fw-1#
and my firewall is rebooting , Can any one have idea about this
Thanks
12-07-2003 02:23 PM
The PIX software table (http://www.cisco.com/cgi-bin/tablebuild.pl/pix) shows that the 6.2(3) image is 1677312 bytes in length. The file you're uploading to the PIX is only 128336 bytes, so something went wrong when you downloaded the file.
I suggest you download it again, verify the file size and if it's 1677312 then proceed to upload it onto your PIX.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide