Is it possible to have a site to site (PIX to PIX) IPSec VPN while having the PIX at one of these sites listen for PPTP remote access VPNs? Every time I apply my crypto map to the outside interface my PPTP clients stop getting routed to the inside network. They get connections, but no activiy to the inside network. Once I disablel the crypto map from the outside interface the PPTP clients work fine. Is this config possible?
It should be work just fine, one thing to look out for is to make sure that the PPTP traffic doesn't match the Interesting traffic for the Site to Site, that way the PPTP return traffic will get encrypted and the clients will never see it. A good way to know if this is happening is to see if the IPSec SA encrypts increment when PPTP traffic is sent to this PIX.
If you have already verified this, then feel free to get in touch with the Cisco TAC and show them the config to check for any other conflicts/issues.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...