Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX IPSEC Help needed

can i give a static gate way to Ipsec/l2tp adopter, we deployed the tunnel its working fine , but one specific application required Gateway ip address should be the standard , we are working on XP

PPP adapter jj:

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface

Physical Address. : 00-53-45-00-00-00

Dhcp Enabled. . . . . . . . . . . : No

IP Address. .. . : 10.133.3.202

Subnet Mask . . : 255.255.255.255

Default Gateway .: 10.133.3.202

DNS Servers . . : 10.133.3.3

Primary WINS Server . : 10.133.3.3

i want change the default Gate insted of 10.133.3.202 / 10.133.3.145

plz help me how to do it ?

3 REPLIES

Re: PIX IPSEC Help needed

You cannot change the default gateway IP address, as the traffic needs to enter the virtual adapter to be encrypted and sent over the IPSEC/L2TP.

New Member

Re: PIX IPSEC Help needed

Hi

Is there any other option like routing or ACL or some thing to make 10.133.3.146 to act as a gate way for the vpn clients

Re: PIX IPSEC Help needed

No - the gateway on the client MUST be the virtual adapter that the traffic is encrypted thru on the local machine, that is the only way it works.

124
Views
0
Helpful
3
Replies