Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX Login issue

Hello Champs,

I am using PIX-506E version 6.3(5)

In order to do a scheduled config download, my script is hard coded to login

with a user name and password and execute the show running command. However, since i have enable password configured, I am unable to exectue the show running from the user mode.

My question is I can create a different username & password, but the criteria is that it should go to the priviledge mode directly. Since my script is hard coded, i am unable to modify it. Below is the AAA commands for your reference. Any help is highly appreciated. Thanks in advance

aaa-server TACACS+ protocol tacacs+

aaa-server TACACS+ max-failed-attempts 3

aaa-server TACACS+ deadtime 10

aaa-server RADIUS protocol radius

aaa-server RADIUS max-failed-attempts 3

aaa-server RADIUS deadtime 10

aaa-server LOCAL protocol local

aaa authentication ssh console LOCAL

aaa authorization command LOCAL

Regards,

Manoj

2 REPLIES

Re: PIX Login issue

try

username <> password <> priv 15

Cisco Employee

Re: PIX Login issue

Hi Manoj,

ASA/PIX/FWSM does not support AAA Exec

Authorization functionality yet, so it cannot be configured with TACACS or

RADIUS to jump directly to privilege exec mode. you need to go through with enable authentication mode.

username: xxxx

password:xxxx

>enable

password:

HTH

JK

Plz rate helpful posts-

~BR Jatin Katyal **Do rate helpful posts**
121
Views
0
Helpful
2
Replies