11-17-2007 02:28 PM - edited 02-21-2020 01:47 AM
Hi, all.
As far as I know, Cisco IOS offers the ability (by default) to copy the IP ToS values from the packet header into the tunnel header when using an IPSec tunnel. But does the PIX software version 6.x do the same thing? I'd like to configure QoS on my PIX firewall, but it looks like version 6.3 doesn't support QoS at all. Maybe at least it can copy ToS into the tunnel header???
Thanks.
Solved! Go to Solution.
11-19-2007 06:40 AM
Yes, the Pix copies the TOS value into the tunnel header during encapsulation. You need to be running version 5.2(1) and higher.
Please refer the Bug ID CSCdr41431 and Release Notes for details.
http://www.cisco.com/en/US/docs/security/pix/pix52/release/notes/pixrn521.html
Let me know if it helps.
Regards,
Arul
** Please rate helpful posts **
11-19-2007 06:40 AM
Yes, the Pix copies the TOS value into the tunnel header during encapsulation. You need to be running version 5.2(1) and higher.
Please refer the Bug ID CSCdr41431 and Release Notes for details.
http://www.cisco.com/en/US/docs/security/pix/pix52/release/notes/pixrn521.html
Let me know if it helps.
Regards,
Arul
** Please rate helpful posts **
11-19-2007 11:17 AM
Good news, I'll give it a shot soon.
Arul, thanks for the link.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide