04-17-2006 02:41 AM - edited 02-21-2020 12:50 AM
Hi,
I can connect the hyper terminal though break charactar isn't working.I'm trying with ESC and Ctrl-Break.What may be the problem (Keyboard issue i'm guessing,using a dell keyboad,but couldn't arrange alternate one)
Any solutions welcome...
Regards
Sourav
04-17-2006 03:41 AM
Hello Sourav,
try a different emulator:
HyperTerminal Private Edition version 6.3
http://www.hilgraeve.com/htpe/index.html
TeraTerm
http://www.ayera.com/teraterm/download.htm
Also, have a look at this document:
Standard Break Key Sequence Combinations During Password Recovery
http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a0080174a34.shtml#how-to
HTH,
GNT
04-20-2006 01:13 PM
Try another OS or computer or comm port.
I had the same problem, when I was using a IBM T42 thinkpad with USB to Serial cable.
Don't think it is the IBM as I have talk to other cisco engineer using T42. So it must be the cable.
But that is my case. In your case, you may want to try another OS or PC or comm port.
04-21-2006 12:36 PM
Hi Sourav,
My suggestion is to disable the flow-control setting in hyperterminal. Please let me know if it works.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide