pix port forwarding

[borknager]

Hello,

I have been having a little trouble getting these few commands to take.

I need to have to inside addresses mapped to allow to sessions of pcanywhere to go through. One to the server, and one for a pc that is used by an outside company

Here is what I was trying to get to work

static (inside,outside) tcp 5633 xxx.xxx.xxx.xxx 5633 192.168.1.2 netmask 255.255.255.255 0

0

static (inside,outside) udp 5634 xxx.xxx.xxx.xxx 5634 192.168.1.2 netmask 255.255.255.255 0

0

static (inside,outside) tcp 5631 xxx.xxx.xxx.xxx 5631 192.168.1.15 netmask 255.255.255.255 0

0

static (inside,outside) udp 5632 xxx.xxx.xxx.xxx 5632 192.168.1.15 netmask 255.255.255.255 0

0

Now, when ever I try to enter these in, I get maximum number of connections should lie between 0 and 65535. I thought I specified that already

We have it working if we just want to get into the server using this

static (inside,outside) xxx.xxx.xxx.xxx 192.168.1.2 netmask 255.255.255.255 0 0

What am I doing wrong??

Any help wil be appreciated

Thanks

[aacole]

The command syntax should be:

static (inside,outside) tcp xxx.xxx.xxx.xxx 5633 192.168.1.2 5633 netmask 255.255.255.255 0 0

static (inside,outside) tcp xxx.xxx.xxx.xxx 5631 192.168.1.15 5631 netmask 255.255.255.255 0 0

So when you connect to xxx.xxx.xxx.xxx 5633 you get re-directed to 192.168.1.2 5633 and 192.168.1.15 for connections to port 5631.

[#3]

Can this be done when the outside address us configured for dynamic addressing? If so can you give me the syntax.

Thanks

Shawna