Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX Port

Hi,

We have got a PIX 515E with the IOS version of 6.3(5)and got three interface which it was in use (for inside, outside and MPLS vpn)

My requirement is to establish a new Leased line from the PIX to my customer point so i need to know there is any chance of doing it with the existing setup or by adding a new ports or card

orelse we have to go for the router

Please suggest on the above issue

Regards,

Vinoth

1 REPLY
Silver

Re: PIX Port

This entirely depends on your network architecture, although it is good to have a router in front of PIX so that you can easily route the packets and do NAT/PAT if required. If PIX can handle extra load then you can directly connect the new network to PIX.

246
Views
0
Helpful
1
Replies
CreatePlease login to create content