I have had them both running since about 5 minutes after they made it to CCO. The only thing not documented has to do with the cert from the pix. You will have to add an entry for the host and domain name you set up for the PDM on the pix to the host file of the workstation you will be running the PDM from. You will also have to manually install the cert by going into details and install certificate.
Yes I did but, you use https when you are connecting and you connect to the pix from a workstation on the inside interface so as to not expose it to cruel world :) It looks like you can configure it to be accessible via the web on the outside interface but, I wouldn't recommend that.
BenefitsDocumentationPrerequisiteImage Download LinksLimitationsSupported PlatformsLicense RequirementsTopologyStep-By-Step ConfigurationConfigure Virtual ServiceActivate the virtual service and configure guest IPsConfiguring UTD (Service Plane)Configurin...
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...