Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PIX site to site and remote access

Dear guys

i have an PIX 515e with 8.0 version and in the other side a 2811 router, the site to site vpn between these two device is established, but i want some remote client can connect to pix ,

so is this possibe two implement site to site and remote access vpn on one pix interface (outside) ??

any hint?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: PIX site to site and remote access

Hi

Yes, this is perfectly possible. Please see attached configuration example. Note it is for pix v7.x but it should work fine for 8.x

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807f9a89.shtml

HTH

Jon

1 REPLY
Hall of Fame Super Blue

Re: PIX site to site and remote access

Hi

Yes, this is perfectly possible. Please see attached configuration example. Note it is for pix v7.x but it should work fine for 8.x

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807f9a89.shtml

HTH

Jon

101
Views
0
Helpful
1
Replies
CreatePlease to create content