Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

pix snmp agent busy issue

My recently upgraded pix 525 (Version 7.1(2)) seems to have an issue with the snmp-agent, keeps flipfloppin this config.

- snmp-server host inside xxxxxxt community xxxxx

- snmp-server host inside xxxxx trap community xxxxxxx version 2c

- snmp-server location xx

- snmp-server contact xx

- !snmp-server community <removed>

- snmp-server enable traps snmp authentication linkup linkdown coldstart

- snmp-server enable traps syslog

+ SNMP agent module is currently busy. Please retry the 'snmp-server' command at a later time.

- SNMP agent module is currently busy. Please retry the 'snmp-server' command at a later time.

+ snmp-server host inside xxxxxxx community xxxxxx

+ snmp-server host inside xxxxxxxxx trap community xxxx version 2c

+ snmp-server location xxx

+ snmp-server contact xxx

+ !snmp-server community <removed>

+ snmp-server enable traps snmp authentication linkup linkdown coldstart

+ snmp-server enable traps syslog

searched the tacs and this forum but we seem to be unique

any hints?

Frans Verschoor

Rotterdam

1 REPLY
Silver

Re: pix snmp agent busy issue

TRSMEDIA-BASE-MIB make SNMP agent busy. It takes a long time to come up, and after it comes up all the values are ERROR. The resolution is to reset the system.

352
Views
0
Helpful
1
Replies
CreatePlease to create content