10-04-2002 07:45 AM - edited 02-21-2020 12:06 PM
Hi
i am trying to telnet (preferebly ssh) into a pix firewall after logging into the network with a 3.51 vpn client without success. can u people giude me
thanks
10-04-2002 10:47 AM
I don't think you can do this (ie VPN through the PIX outside interface and then try to ssh/telnet into the inside interface). You can however SSH to the PIX on the outside interface.
See link on which version you have and how to enable SSH (add hostname, domain name, telnet password, SSH address, generate a key) on the PIX: http://www.cisco.com/warp/public/110/pix_command_ref.shtml
Hope it helps.
Steve
10-06-2002 03:29 AM
hi
thanks for your reply.
the issue is that i want to remotely login through internet access using my laptop - roaming from different locations & configure/troubleshoot the PIX remotely.
so is it possible
10-06-2002 05:15 AM
Options I can think of:
-VPN into network, ssh/telnet to another network device on the inside of the PIX, then telnet to inside of PIX from that device.
-Use SSH on the outside (IP would be any, or your ISPs DHCP scope) and authenticate via a AAA server. The ssh option in 6.x specifies the group of AAA servers to be used for SSH user authentication. The authentication protocol and AAA server IP addresses are defined with the aaa-server command statement.
Steve
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide