The only way I have achieved this in the past is to have a device, such as a PC running remote control software or a router, on the inside of the PIX that you can connect to, then initiate a telnet connection back to the PIX.
I'm having the same problem. My tunnel works , but I can't connect to the inside IP address via Telnet, haven't tried SSH. though.
Can you answer me a dumb question. It seems that my postings are not posting. I'm using the e-mail address of ' email@example.com' to do the posting but they never get there. am I using the wrong e-mail address or method. Are postinging only allowed thru the web site?
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...