06-03-2002 05:24 AM - edited 02-20-2020 10:04 PM
I tried to copy config of PIX 520 to tftp but got got failed message wilth unknown reason...
wr net tftp:filename
Regards
Raza bhutta
06-03-2002 05:29 AM
If you are running release 6.2 :
wr net tftp-ip
release 6.2 won't accept any filename..
ralph
06-03-2002 05:33 AM
Thanks for reply I have 6.1
Cisco PIX Firewall Version 6.1(1)
pixa# wr net 202.125.128.210:pixa.cfg
Building configuration...
TFTP write 'pixa.cfg' at 202.125.128.210 on interface 1
Unspecified Error
[FAILED]
06-03-2002 09:33 PM
Thanks for reply I have 6.1
Cisco PIX Firewall Version 6.1(1)
pixa# wr net 202.125.128.210:pixa.cfg
Building configuration...
TFTP write 'pixa.cfg' at 202.125.128.210 on interface 1
Unspecified Error
[FAILED]
Pls advise.......
06-07-2002 05:48 AM
I had the same problem with v6.1, until I accidentally figured out that you need a forward-slash in there to make it work:
pixfw# wr net :/filename.txt
Keep in mind that I have specified a defualt TFTP directory in my config, so I didn't need to include an IP address.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: