Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

pix to check point vpn help

All, I need some help. Im trying to do a site to site vpn from my pix 515 with version 7.2 code on it to a check point firewall version R54. Can you guys check my config on the Pix side to make sure it looks ok? Im getting traffic one way only, and not the other way. In other words, from Pix site, I can ping a device at the check point site, but from the check point site, I can not ping anything from the pix side. A little help would be appreciated.

2 REPLIES
Bronze

Re: pix to check point vpn help

Refer to Configuring an IPSec Tunnel Between a Cisco Secure PIX Firewall and a Checkpoint NG Firewall document for more information

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800ef796.shtml

Probably, if you use PIX version 7.2 for the same configuration of checkpoint is compatible.

Community Member

Re: pix to check point vpn help

Thanks. re-created check point side and it works. thanks for the link.

147
Views
4
Helpful
2
Replies
CreatePlease to create content