Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX to Client VPN with local authentication

Running PIX ver 6.2(2) with DES activation key 56 bit.

Trying to get VPN3000 client ver 3.6.3 to vpn through the PIX. Can this be done using local usernames configured on the PIX itself ? Or do you have to use an external Radius server ?

3 REPLIES
New Member

Re: PIX to Client VPN with local authentication

I´m using this config with VPN3000 client ver 3.6.1, and using local auth.

This work fine to me.

New Member

Re: PIX to Client VPN with local authentication

Is there any chance you could let me have a copy of your configuration ?

Changing the sensitive bits if you need to....

Many thanks..

Mark

New Member

Re: PIX to Client VPN with local authentication

For information if anyone has a look at this.

I needed to raise a TAC case on this one....

It is possible to locally authenticate Client VPN's on a router but this is currently not supported on the PIX...6.2 does allow local auth but only for commands on the PIX itself rather than auth through the box.

105
Views
0
Helpful
3
Replies